自动检测da/dN的微机系统

研制了一种da/dN自动检测系统;介绍了其工作原理和裂纹长度a及循环数N的采集方法;与传统的目测法做了对比;显示了该系统的优越性。     

三轴一体化光纤陀螺技术

为了实现光纤陀螺组合小型化、低成本和高精度,进行了三轴一体化光纤陀螺样机的研制。该样机包括光学表头和陀螺解算电路两部分,其中,三个安装在三维空间正交支架上的敏感线圈共用一个光源,并且和其它独立的光学器件组成光学表头。陀螺解算电路由一块FPGA芯片处理三路探测器输出信号,输出与角速度成正比的数字信号。与传统光纤陀螺组合相比,三轴一体化光纤陀螺的组合结构缩小60%,成本降低20%,功耗降低一倍,但制作工艺较复杂。经过测试,其性能和单轴陀螺相当。此项研究技术可广泛应用于对体积要求严格的战术型号上。     

Condition Monitoring of Ground Anchorages by Dynamic Impulses: GRANIT System

The GRANIT system operates by applying an impulse of known force by means of an impact device that is attached to the tendon of the anchorage. The vibration response signals resulting from this impulse are complex in nature and require analysis to be undertaken in order to extract information from the vibrational response signatures that is relevant to the condition of the anchorage. In the system, the complicated relationship that exists between characteristics of an anchorage and its response to an impulse is identified and learned by a novel artificial intelligence network based on artificial intelligence techniques.The results presented in this paper demonstrate the potential of the GRANIT system to diagnose the integrity of ground anchorages at a site near Stone, England, by using a trained neural network capable of diagnosing the post-tension level of the anchorage. This neural network was used for the diagnosis of load in a second ground anchorage adjacent to the original anchorage used for the training of the neural network. Further tests were taken with a different anchor head configuration of the anchorage and a different relationship between the signature response of the anchorage to an applied impulse and its post-tension level was found.Problems encountered during the diagnosis of this second set of test signatures by the trained neural network are investigated with the use of a lumped parameter dynamic model. This model is able to identify the parameters in the anchorage system that affect this change in response signature. The results from the investigation lead to a new form of classification for the installed anchorages, based on their anchor head configuration.Laboratory strand anchorage tests were undertaken in order to compare with and validate the results obtained from the field tests and the lumped parameter dynamic model.     

大变位时物体变形测量的相关性恢复方法

本文提出根据白光散斑图像数据模拟刚体位移复位的相关性恢复方法，以解决物体大变位情况下的变形测量问题     

两相流PIV粒子图像处理方法的研究

本文在单相PIV技术的基础上研究了两相流动PIV图像处理方法，采用摸板匹配法和灰度加权标定法对两相粒子进行了识别、区分和标定，采用灰度互相关法对区分后的单相粒子图像进行了处理，应用基于以上方法编制的Windows应用软件，首先对由美国Minnesota大学复杂流动实验室提供的两相流动粒子图片进行了处理，通过对比分析可见，应用本文所采用的方法能对两相粒子进行有效的识别和区分，然后以搅拌槽内液固两相流场为例对此方法进行了应用。     

Application of the Fourier transform in electronic speckle photography

In speckle photograph technology, to determine the displacement of the points on the surface of the measured body, the conventional method is to put the film which has recorded the speckle patterns before and after displacement into a system of optical Fourier transforms. After filtering on the spectrum plane, the experimentalist can obtain the displacement information from the interference pattern on the image plane. Instead of setting up a complex optical Fourier transform system, we consider the speckle field as a light intensity function of 2 dimensions, which will change with different positioning of the points. After working on the function's discrete Fourier transform (DFT), according to one of the properties of Fourier transformation, the displacement of the measured point is involved in the phase of its spectrum. Having extracted the displacement information from the phase, we obtain the distribution of the displacement field. In this paper, we deduce the expression for the displacement field by using Fourier transformation under conditions of both equal and unequal displacement and show their applications.     

用人工产生的拟湍流信号检验相干结构的检测方法

本文利用计算机产生拟湍流脉动信号，将数据进行频谱分析和能谱分析，发现湍流中相干结构不仅包合低频成分还包含一定数量高频成分，因而简单地认为湍流中低频部分是相干结构而高频部分是小尺度脉动，来确定相干结构能量在湍流中所占成分是不科学的；本文还将得到的数据用几种条件采样方法检测相干结构数量和位置，以此判断检测方法的优劣，发现就这类信号而言ＭＵ—ＬＥＶＥＬ法要比ＶＩＴＡ法准确性要高一些。     

斜拉桥塔锚固区光弹性应力分析与等倾线图像处理

本文采用光弹性冻结应力法，对独塔斜拉桥塔锚固区进行了应力分析，给出了有关截面的边界应力分布及主应力迹线，从而为优化工程设计提供了重要的参考依据。本文还提出了一种新的提取等倾线的方法──图像对数增强相减法，实现了等倾线与等差线条纹的分离，同时使条纹得到了细化，提高了处理等倾线的速度与准确度。编制了自动绘制主应力迹线的程序，利用它绘制了桥塔截面的次主应力迹线。     

基于数字图像的土、岩和混凝土内部结构定量分析和力学数值计算的研究进展

土、岩及混凝土是一种内部结构极其复杂的材料,内部细观组成和结构决定了它们在外力作用下内部应力和应变等物理场的分布状态,在很大程度上控制了它们的宏观力学响应和破坏机理和过程。自1995年以来,数字图像处理技术作为一种材料细观空间结构及几何形态的精确量测和数字表述手段快速地被应用于沥青混凝土、水泥混凝土、土和岩体材料细观结构定量分析中来。本文在研究相关文献的基础上,分析和研究了数字图像技术在土、岩及混凝土内部结构定量分析和力学数值计算中的发展过程和研究成果,内容包括:单个骨料颗粒形态特征定量分析;土、岩和混凝土内部结构定量分析;岩体结构定量分析中的应用;基于数字图像处理的土、岩和混凝土细观结构力学计算。在此基础上,本文进一步对数字图像技术在岩土领域中的应用进展及未来的发展趋势进行了探讨,认为数字图像作为一种空间分布测量手段和数字表述方法使得它具有巨大的潜力,特别是在岩土领域的纵深发展过程中,它可能实现考虑细微观结构性的岩土力学和工程分析和预测的、新的方法和理论。     

白光数字散斑图像频域自动识别技术——用于逐点分析的数字相移法

提出了一种应用于白光数字散斑图像频域位移测量技术的数字相移方法,利用计算机本身的能力,无需增加任何设备,通过计算机生成的四幅图像进行相移计算,得到逐点分析的条纹的未去包裹图像,从该图像确定位移的方向和大小,实现了白光数字散斑图像的全自动化处理。白光数字散斑方法设备简单,对环境的要求低,无需防振和相干光源,引入本文提出的数字相移技术,由于充分利用了计算机数字图像处理的功能,在未增加任何设备的情况下实现了全自动位移测量,是一种适合工业现场测量的有发展前途的位移测试的技术。